Aqara Wall Switch H1 EU Zigbee (No Neutral)

Aqara H1 EU is a wall switch with a single-channel/double relay inside, based on the Zigbee 3.0 wireless communication protocol. This product is mainly used to control the switching on/off of electrical circuits, e.g. lighting or fan. It works with a controller to achieve functions such as remote control via application and automation. Lots of scenes can be realized when working with other Aqara smart devices.

When the H1 EU smart wall switch detects that the power or temperature is above the threshold, it will automatically cut off the power to protect you from any danger. When the network in your home is unstable or interrupted while the hub is operating normally, the associated automation between the Aqara Wall Switch H1 EU  and the sensors can still work properly.

Aqara Wall switch with one button H1 EU fits in a box for a depth of 45 mm, zero wire is not required for its installation.

Features:

• Model: WS-EUK01/WS-EUK02
• Dimensions: 85.8x86x37.55 mm
• Wireless protocol: Zigbee 3.0
• Electrical power: 100-250V AC, 50/60 Hz
• MAX load: 8A (resistive load)
• MIN load: 3W (typical)
• Ambient temperature: 0 ° C ~ 40 ° C
• Operating humidity: 0 – 95% RH, no condensation
• Operating frequency: 2400 ～ 2483.5 MHz

* This device is an EU version, model: WS-EUK01/WS-EUK02. This version of the device is intended for use with the Aqara Hub EU version.
* For complex automations (notifications, actions afterwards) must be connected to the Aqara Hub to which compatible devices are connected.
* If you want to use this device as a HomeKit device, an Aqara Hub is required. This Aqara Hub can work as a HomeKit bridge (you must use the Aqara Home app), which means that devices connected to the Aqara Hub can be managed through the HomeKit app. If you want to remotely control a device instead of your local Wifi / LAN home network, you need an Apple TV (with tvOS 10.2 or later) or an iPad (with iOS 10.3 or later) or a HomePod set up as home hub.
* The product is restricted for internal use, does not work alone, but only connected to a compatible Aqara Hub.