Fibaro Double Smart Module

The remotely operated FIBARO Smart Module and Double Smart Module are designed to turn electrical devices or circuits on and off.

Thereby, the connected devices can still be controlled with the existing wall switch, but – thanks to Z-Wave – also via remote control, smartphone, or sensor-controlled automation.

The compact radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the loads but acts as an input device for the Fibaro insert that is controlling the loads. The switch only sends a control signal to the insert which controls the loads then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box, and the amount of additional cabling placed in this box.

Features:

• Power supply: 100-240V~ 50/60Hz or 24-30V DC
• Rated load current: 6A per one channel / 9.5A total
• Compatible load types: resistive or incandescent only
• Operating temperature: 0–35°C
• Ambient humidity: 0–95% RH without condensation
• Radio protocol: Z-Wave (500 series chip)
• Radio frequency band: 868.0–868.6MHz; 869.7–870.0MHz
• Max. transmitting power: +5dBm
• Range: Up to 50m outdoors / Up to 40m indoors(depending on terrain and building)
• Dimensions: 42.5mm x 38.25mm x 20.3mm