Heatit Z-TRM3 -Wall Thermostat for underfloor heating

Heatit Z-TRM3 is an electronic thermostat for electric underfloor heating, designed to be installed in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected to home automation systems. Heatit Z-TRM3 is equipped with a single relay and can be mounted with System 55 frames. The thermostat can withstand a load of max. 16A/ 3600W at 230V. The thermostat can be used for water-based heating if it is connected to Heatit Z-Water.

Features:

• Floor sensor.
  
• Internal room sensor
  
• External room sensor (connected with cable)
• Temperature limiter
  
• SmartStart
• Weekly program/ set via controller.
• Temperature reading in the controller.
• Firmware update (OTA)
• Power measurement
  
• Relay LED status
  
• Single relay
  
• Lock mode /Lock mode for children
• Calibration
• Works with 5 associative groups with up to 5 devices in each group.
• Supports encryption modes: S0, S2 Authenticated Class, S2 Unauthenticated Class

Specification:

• Protocol: Z-Wave – 868,4MHz
• Chip: Z-Wave 500 chip
  
• Nominal Voltage: 230V 50 / 60Hz
• Max. Load: 3600W (Resistive load) 750W self-regulating heating cable.
  
• Max. Current:16А
• Energy consumption <2,0W
• Ambient temperature 0 ° C to 40 ° C (During work)
• Temperature range from 5 ° C to 40 ° C
• Hysteresis 0,3 ° C to 3,0 ° C (default 0,5 ° C)
• Compatible with NTC value sensors 10, 12, 15, 22, 33 & 47 kΩ at 25 ° C
• IP code: IP 21
• Certificates: Z-Wave Plus, CE, EN 60730-1, EN 60730-2-9, EMC 2014/30 / EU, RoHS 2011/65 / EU, LVD 2014/35 / EU