4 In 1 Multisensor Philio (Movement, Door/ Window, Temperature, Lighting)

Philio’s PSM02 multisensor is a Z-Wave device in a small and sleek body, offering 4 different functions: door / window opening / closing reading, motion sensor, temperature sensor and light sensor.

It consists of two parts: a sensor and a magnet with dimensions of 28 x 96 x 23 mm on the multisensor and 10 x 50 x 12 mm on the magnetic part. They are designed to be mounted on a door or window, with the magnetic part on the opening part and the sensor on the fixed part.

Thanks to this device, you no longer need to install different temperature and light sensors in one room to be able to automate different types of scenes. From the data obtained, you can easily implement various scenarios, such as a security system with an alarm or automatic switching on of the lighting when the door is opened, detected movement or insufficient lighting.

The multisensor sends information to the controller in case of significant changes in brightness and / or temperature, as well as movement or when opening / closing the door / window on which the sensor is installed. This allows the device to run extremely long before the battery needs to be replaced. According to the manufacturer and in the standard configuration, the device can work for up to 2 years before the battery needs to be replaced.

The sensor is connected to the Z-Wave network via a Z-Wave controller.

Characteristics:

• 4 in 1 sensor: opening / closing, movement, temperature, illumination
• Uses 400 Series Z-Wave chip, supporting multi-channel operations and 9.6 / 40 / 100kbps data transfer rate
• Uses Z-Wave SDK 6.02
• Optimized antenna range
• Used for home automation and security
• Add / remove button to / from the Z-Wave network
• Protection from outside interference
• Low battery indication
• Small, discreet and aesthetic
• Easy to use and install