Fibaro Flood Sensor

The Fibaro Flood Sensor warns you in the event of a flood threat or a sudden rise or fall in temperature. It can be powered by a battery or by an external power supply of 12V or 24V DC. When connected to an external power source, the battery is used as a backup power supply.

The device has a temperature sensor, LED and audio alarms, as well as a tilt sensor if someone moves the device from its original position.

Waterproof and floating on the water surface. It is designed to be placed on the ground, but can also be mounted on a wall.

For your safety and to ensure that the detector is working properly there is a test mode. Communication in the wireless Z-Wave network keeps you connected at a great distance to the hub and other indirectly connected Z-Wave modules. The built-in LED indicator allows you to easily check whether the sensor has a good range and can communicate with the Fibaro system or needs to be relocated.

Features:

• Power supply: Battery and/or power supply unit
• Battery type: 3V, CR123A
• Supply type: 12–24V DC, LPS or NEC class 2
• Power consumption (at DC operation): 0.4W
• Maximum voltage at output terminals (ALARM NC, TAMP NC): 24V DC / 20V AC
• Radio protocol: Z-Wave (500 series chip)
• Radio frequency: 868.4 MHz EU
• Range: up to 50m outdoors up to 40m indoors (depending on terrain and building structure)
• Operating temperature: 0–40°C
• Measured temperature range: -20–100°C
• Temperature measuring accuracy: 0.5°C (within 0–40°C range)
• Dimensions (Diameter x Height): 72 x 28 mm